Filter By
Filter By
Brand
Brand
Categories

Category: Home

Reference: 011-101
€0.00 (tax incl.)
The Labcycler Gradient (011-101) has the same technical features as its brother Labcycler Basic has. In addition, the Gradient function is active which can be applied by Thermoblock 48 (012-102), Thermoblock 96...
Reference: 011-103
€0.00 (tax incl.)
The Labcycler Basic (011-103) is a thermal cycler designed for classical PCR. Since 2005 Labcyclers are produced by SensoQuest and are in use. Take a look at references. The solid design with an aluminum front plate...
Reference: 011-801
€0.00 (tax incl.)
All Labcyclers are available in a basic version without gradient function. These systems are a little bit cheaper. It concerns: Labcycler Basic, Labcycler 48, Labcycler 48s, and Labcycler 192s. An Upgrade (011-702)...
Reference: 012-101
€0.00 (tax incl.)
The Thermoblock 384 (012-101) is a unique silver block produced only by SensoQuest. The block is processor controlled gradient-capable block with 6 separately controlled peltier elements for extraordinary temperature...
Reference: 012-102
€0.00 (tax incl.)
The Thermoblock 48 (012-102) is a unique silver block produced only by SensoQuest. The block is processor controlled gradient-capable block with 6 separately controlled peltier elements for extraordinary temperature...
Reference: 012-103
€0.00 (tax incl.)
The Thermoblock 96 (012-103) is a processor controlled gradient-capable block with 6 separately controlled peltier elements for extraordinary temperature homogeneity. The thermal conductivity of silver with 429 W/mK...
Reference: 012-104
€0.00 (tax incl.)
The Triple Block (012-104) consists of 3 independent blocks working total time independent. The 3 blocks can be started, stopped and loaded at different times. Three totally different PCR processes can run at the same...
Reference: 012-107
€0.00 (tax incl.)
The In situ Block (012-107) is a processor controlled Thermoblock with 6 separately controlled peltier elements for extraordinary temperature homogeneity. The block is flat and designed for slides. The high...
Reference: 012-201
€0.00 (tax incl.)
The Passive Lids (012-201) are used for Triple Block applications. 3 Passive Lids will be delivered with one Triple Block. In case of a lost or a defect Passive Lids can be ordered separately.
Reference: 012-701
€0.00 (tax incl.)
The Sealing Pad (012-701) was designed especially for the use with the Thermoblocks 96 (012-103), 96 alu (012-108), and 384 (012-101). It significantly optimizes the foil sealing on microplates at 120 Newton pressure....
Reference: 013-101
€0.00 (tax incl.)
Labcycler 48 has a block with 48 wells for 0.2 ml tubes in an array of 6 x 8. Working with single tubes and stripes is possible. Heating and cooling rates are 3.5 °C/s and 3.2 °C/s during real operations. A coloured...
Reference: 013-102
€0.00 (tax incl.)
Labcycler 48 has a block with 48 wells for 0.2 ml tubes in an array of 6 x 8. Working with single tubes and stripes is possible. Heating and cooling rates are 3.5 °C/s and 3.2 °C/s during real operations. A coloured...
Reference: 013-103
€0.00 (tax incl.)
Labcycler 48s has a gold coated silver block with 48 wells for 0.2 ml tubes in an array of 6 x 8. The thermal conductivity of silver with 429 W/mK resulted in a better block uniformity in contrast to aluminum (237...
Reference: 013-104
€0.00 (tax incl.)
Labcycler 48s has a gold coated silver block with 48 wells for 0.2 ml tubes in an array of 6 x 8. The thermal conductivity of silver with 429 W/mK resulted in a better block uniformity in contrast to aluminum (237...
Reference: 013-113
€0.00 (tax incl.)
Labcycler 192s has a gold coated silver block with 192 wells. A quarter or a half 384 microplate can be used to save PCR mix material. The gold coated silver block results in high cooling and heating rates: 5.0 °C/s...
Reference: 013-114
€0.00 (tax incl.)
Labcycler 192s has a gold coated silver block with 192 wells. A quarter or a half 384 microplate can be used to save PCR mix material. The gold coated silver block results in high cooling and heating rates: 5.0 °C/s...
Reference: 610-102
€0.00 (tax incl.)
The Touch Pen is a high qualitative pen made of metal. Every Labcycler is delivered with a Touch Pen. It could be used for the touch screen of the Labcycler. In addition, it has a ball pen function. Only one piece...
Reference: 610-103
€0.00 (tax incl.)
The Touch Pen is a high qualitative pen made of metal. Every Labcycler is delivered with a Touch Pen. It could be used for the touch screen of the Labcycler. In addition, it has a ball pen function. Only one piece...
Reference: 620-101
€0.00 (tax incl.)
The Trolley (620-101) is specially designed for the Labcycler and its smaller brother Labcycler 48. The aluminium chassis protects the system against vibration. The inlay is designed for 2 extra blocks and additional...
Reference: ISWAB‐DNA‐1200
€0.00 (tax incl.)
DNA collection kit for humans that can capture samples producing high yields of double stranded, long fragmented DNA from buccal cells using traditional swabs.
Reference: ISWAB‐DNA‐250
€0.00 (tax incl.)
DNA collection kit for humans that can capture samples producing high yields of double stranded, long fragmented DNA from buccal cells using traditional swabs.
Reference: ISWAB‐RNA‐v2
€0.00 (tax incl.)
The iSWAB-RNA-v2 device allows for the non-invasive collection, concentration, and stabilization of intact buccal cells and/or any mammalian cells collected with a swab or cytobrush allowing for real time ambient...
Reference: ISWAB‐P‐1200
€0.00 (tax incl.)
Non-invasive sample collection tube for collection and stabilization of protein and DNA in the same oral sample.  Oral sample collection has gained widespread acceptance due to its non-invasive nature and because...
Reference: ISWAB‐DSC
€0.00 (tax incl.)
iSWAB-Discovery is a DNA collection kit for humans or animals that can capture samples producing robust yields of double stranded, long fragmented DNA from buccal cells using traditional swabs. iSWAB-DSC is...
Reference: ISWAB‐ID‐250
€0.00 (tax incl.)
Non-invasive sample collection tube for collection and stabilization of protein and DNA in the same oral sample. iSWAB-ID is an efficient sample collection system which enables long term room temperature stabilization...
Reference: ISWAB‐BL‐250
€0.00 (tax incl.)
iSWAB-Blood is an efficient system for the concentration and long term room temperature stabilization of gDNA and analytes from blood drops. Investigation of  metabolic genetic disorders has traditionally been...
Reference: iSWAB‐MB‐1200
€0.00 (tax incl.)
iSWAB-Microbiome has been proven to efficiently inactivate bacteria, fungi, spores, and DNA/RNA viruses allowing safer transport of biological samples to processing labs, especially when samples are subject to long...
Reference: iSWAB‐MBF‐1200
€0.00 (tax incl.)
iSWAB-Microbiome has been proven to efficiently inactivate bacteria, fungi, spores, and DNA/RNA viruses allowing safer transport of biological samples to processing labs, especially when samples are subject to long...
Reference: ISWAB‐CELLS‐1200
€0.00 (tax incl.)
Multiomics Enabled (including RNA) From the Same Sample: - iSWAB Cells is designed for non-invasive, self-collection of intact and viable buccal cells. -Cell Stabilization System is optimized for room temperature...
Reference: ISD‐T‐1200‐R
€0.00 (tax incl.)
DNA collection kit for humans that can capture samples producing high yields of double stranded, long fragmented DNA from buccal cells using traditional swabs.
Reference: ISD‐T‐250‐R
€0.00 (tax incl.)
DNA collection kit for humans that can capture samples producing high yields of double stranded, long fragmented DNA from buccal cells using traditional swabs.
Reference: ISR2‐T‐1200‐R
€0.00 (tax incl.)
The iSWAB-RNA-v2 device allows for the non-invasive collection, concentration, and stabilization of intact buccal cells and/or any mammalian cells collected with a swab or cytobrush allowing for real time ambient...
Reference: ISP‐T‐1200‐R
€0.00 (tax incl.)
Non-invasive sample collection tube for collection and stabilization of protein and DNA in the same oral sample.  Oral sample collection has gained widespread acceptance due to its non-invasive nature and because...
Reference: ISF‐T‐250‐R
€0.00 (tax incl.)
iSWAB-Discovery is a DNA collection kit for humans or animals that can capture samples producing robust yields of double stranded, long fragmented DNA from buccal cells using traditional swabs. iSWAB-DSC is...
Reference: ISF‐T‐DSC‐R
€0.00 (tax incl.)
Non-invasive sample collection tube for collection and stabilization of protein and DNA in the same oral sample. iSWAB-ID is an efficient sample collection system which enables long term room temperature stabilization...
Reference: ISBL‐T‐250‐R
€0.00 (tax incl.)
iSWAB-Blood is an efficient system for the concentration and long term room temperature stabilization of gDNA and analytes from blood drops. Investigation of  metabolic genetic disorders has traditionally been...
Reference: ISM‐T‐1200‐R
€0.00 (tax incl.)
iSWAB-Microbiome has been proven to efficiently inactivate bacteria, fungi, spores, and DNA/RNA viruses allowing safer transport of biological samples to processing labs, especially when samples are subject to long...
Reference: ISC‐T‐1200‐R
€0.00 (tax incl.)
Multiomics Enabled (including RNA) From the Same Sample: - iSWAB Cells is designed for non-invasive, self-collection of intact and viable buccal cells. -Cell Stabilization System is optimized for room temperature...
Reference: 4000-250
€0.00 (tax incl.)
Positive displacement pipettes are specifically designed for pipetting viscous liquids. In positive displacement pipetting, the piston is in direct contact with the liquid, unlike air displacement pipettes (most...
Reference: 4000-1000
€0.00 (tax incl.)
Positive displacement pipettes are specifically designed for pipetting viscous liquids. In positive displacement pipetting, the piston is in direct contact with the liquid, unlike air displacement pipettes (most...
Reference: 4000-0005
€0.00 (tax incl.)
Thincerts are cell inserts that are recommended for 3D cell culture. These particular cell inserts have a 1um pore size and allow the diffusion of cell culture medium from above and below the membrane, to closely...
Reference: 4000-0010
€0.00 (tax incl.)
Thincerts are cell inserts that are recommended for 3D cell culture. These particular cell inserts have a 1um pore size and allow the diffusion of cell culture medium from above and below the membrane, to closely...
Reference: 4000-0040
€0.00 (tax incl.)
Thincerts are cell inserts that are recommended for 3D cell culture. These particular cell inserts have a 1um pore size and allow the diffusion of cell culture medium from above and below the membrane, to closely...
Reference: 1001
€0.00 (tax incl.)
A standard gel with one bespoke Gamma, functionalisation(RGD, GFOGER, YIGSR, IKVAV) or Delta 5. Examples Alpha-2 IKVAV, Gamma-1.
Reference: 1003
€0.00 (tax incl.)
Fully Bespoke Product e.g. Fluorescently Labelled, Composite Materials
Reference: 2140
€0.00 (tax incl.)
PeptiInks® are ready-to-use fully synthetic self-assembling peptide hydrogels that are biologically relevant and formulated to meet your cells’ needs. Our PeptiInks® are shear thinning and can be used for 3D...
Reference: 21414
€0.00 (tax incl.)
This is a combined functionalised ink containing the fibronectin sequence RGD, and the collagen sequence GFOGER.
Reference: 2001
€0.00 (tax incl.)
A standard ink with one bespoke change.
Reference: 221-00SIP
€0.00 (tax incl.)
Explore a range of PeptiGels® to investigate response of cells in the 3D environment. Our starter packs kits are supplied with the following: PeptiInk Alpha-4, PeptiInk Alpha-4 PLUS, 1x 250 uL Positive Displacement...
Reference: 221-40FIK
€0.00 (tax incl.)
Explore a range of functionalised PeptiInks® that provides biochemical cues to investigate response of cells in the 3D environment. Our functional kits are supplied with each of the following: PeptiInk® Alpha...

Menu

Settings